Chemical, microstructural and strength development of calcium and magnesium carbonate binders

Journal article


De Silva, Premalatha, Bucea, L. and Sirivivatnanon, V.. (2009). Chemical, microstructural and strength development of calcium and magnesium carbonate binders. Cement and Concrete Research. 39(5), pp. 460 - 465. https://doi.org/10.1016/j.cemconres.2009.02.003
AuthorsDe Silva, Premalatha, Bucea, L. and Sirivivatnanon, V.
Abstract

The influence of magnesium on the chemistry of calcium carbonate formation has been studied. It was found that the type of carbonate formed by subjecting compacts of Ca(OH)2 and Mg(OH)2 to carbon dioxide (up to 20 atm CO2 pressure) for variable periods of time is largely controlled by the molar proportion of calcium to magnesium in the initial mixture. Increasing magnesium content in the initial mixture favours the formation of nesquehonite and other carbonates containing both calcium and magnesium. The compressive strength of the carbonate is improved with the presence of nesquehonite and/or other magnesium-containing phases. Curing time and CO2 exposure influence the strength differently, depending on the initial Ca/Mg ratio of the initial mixture. The formation of magnesium-containing carbonate phases is particularly favoured at higher CO2 pressures combined with prolonged exposure times.

Keywordscarbonation; microstructure; magnesium hydroxide; cement; composite
Year2009
JournalCement and Concrete Research
Journal citation39 (5), pp. 460 - 465
PublisherElsevier
ISSN0008-8846
Digital Object Identifier (DOI)https://doi.org/10.1016/j.cemconres.2009.02.003
Page range460 - 465
Research GroupSchool of Behavioural and Health Sciences
Place of publicationUnited States of America
Permalink -

https://acuresearchbank.acu.edu.au/item/8qzv6/chemical-microstructural-and-strength-development-of-calcium-and-magnesium-carbonate-binders

  • 124
    total views
  • 0
    total downloads
  • 0
    views this month
  • 0
    downloads this month
These values are for the period from 19th October 2020, when this repository was created.

Export as

Related outputs

Advances in technologies used in the detection of food adulteration
Chen, Wenbo, Li, Hui, Wang, Yong, De Silva, Pre, Adhikari, Benu P. and Wang, Bo. (2021). Advances in technologies used in the detection of food adulteration. In In Verma, Madan L. (Ed.). Biotechnological approaches in food adulterants pp. 49-78 CRC Press. https://doi.org/10.1201/9780429354557-3
Mechanical and microstructural properties of Alkali Pozzolan Cement (APC)
Kulasuriya, Chandana, Dias, W. P. S., Vimonsatit, Vanissorn and De Silva, P.. (2020). Mechanical and microstructural properties of Alkali Pozzolan Cement (APC). International Journal of Civil Engineering. 18(11), pp. 1281-1292. https://doi.org/10.1007/s40999-020-00534-3
Assessing carbonation in one-part fly ash/slag geopolymer mortar : Change in pore characteristics using the state-of-the-art technique neutron tomography
Vu, Tran Huyen, Gowripalan, Nadarajah, De Silva, Pre, Paradowska, Anna, Garbe, Ulf, Kidd, Paul and Sirivivatnanon, Vute. (2020). Assessing carbonation in one-part fly ash/slag geopolymer mortar : Change in pore characteristics using the state-of-the-art technique neutron tomography. Cement and Concrete Composites. 114, p. 103759. https://doi.org/10.1016/j.cemconcomp.2020.103759
Evaluating effect of GGBFS in alkali-silica reaction in geopolymer mortar with accelerated mortar bar test
Mahanama, Dinesh, De Silva, Pre, Kim, Taehwan, Castel, Arnaud and Khan, Mohammad. (2019). Evaluating effect of GGBFS in alkali-silica reaction in geopolymer mortar with accelerated mortar bar test. Journal of Materials in Civil Engineering. 31(8), pp. 1 - 11. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002804
Aqueous leaching of an industrial geopolymer
De Silva, Premalatha, Downs, Jacob, Olufson, Kelly, Davis, Joel, Vance, Eric and Johnson, Greg. (2016). Aqueous leaching of an industrial geopolymer. Journal of Australian Ceramic Society. 52(1), pp. 1 - 6.
Influence and role of feedstock Si and Al content in geopolymer synthesis
De Silva, Pre, Tennakoon, Chandani, Sagoe-Crentsil, Kwesi and Sanjayan, Jay G.. (2015). Influence and role of feedstock Si and Al content in geopolymer synthesis. Journal of Sustainable Cement-Based Materials. 4(2), pp. 129 - 139. https://doi.org/10.1080/21650373.2014.979264
Alkali-activated binders: Early age nucleation reactions, chemical phase evolution and their implications on system properties
Sagoe-Crentsil, Kwesi and De Silva, Premalatha. (2015). Alkali-activated binders: Early age nucleation reactions, chemical phase evolution and their implications on system properties. Journal of the Chinese Ceramic Society. 43(10), pp. 1449 - 1457. https://doi.org/10.14062/j.issn.0454-5648.2015.10.15
Effect of high-speed mixing on properties of high calcium fly ash geopolymer paste
Chindaprasirt, Prinya, De Silva, Premalatha and Hanjitsuwan, Sakonwan. (2014). Effect of high-speed mixing on properties of high calcium fly ash geopolymer paste. Arabian Journal for Science and Engineering Section B : Engineering. 39(8), pp. 6001 - 6007. https://doi.org/10.1007/s13369-014-1217-1
Design and development of Alkali Pozzolan Cement (APC)
Kulasuriya, Chandana, Vimonsatit, Vanissorn, Dias, W. P. S. and De Silva, Premalatha. (2014). Design and development of Alkali Pozzolan Cement (APC). Construction and Building Materials. 68, pp. 426 - 433. https://doi.org/10.1016/j.conbuildmat.2014.06.095
Effect of speed and time of mixing on setting time and strength of high calcium fly ash geopolymer
Hanjisuwan, Sakonwan, De Silva, Premalatha and Chinderprasirt, Prinya. (2012). Effect of speed and time of mixing on setting time and strength of high calcium fly ash geopolymer. The 4th KKU International Engineering Conference. Thailand: Khon Kaen University. pp. 18 - 21
Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems
Chindaprasirt, Prinya, De Silva, Premalatha, Sagoe-Crenstil, Kwesi and Hanjisuwan, Sakonwan. (2012). Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems. Journal of Materials Science. 47(4876), pp. 4876 - 4883. https://doi.org/10.1007/s10853-012-6353-y
Academic Guided Peer Support for Struggling First Year Students
Robinson, Kathy, Ballard, Fiona, De Silva, Pre, Hendrick, Lynne, MacGibbon, Mary, Mehta, Hemant and Rouf, Abdur. (2010). Academic Guided Peer Support for Struggling First Year Students. In In N. Riseman, S. Rechter and E. Warne (Ed.). Learning, teaching and social justice in higher education pp. 189 - 176 University of Melbourne eScholarship Research Centre....
The role of Al2O3, SiO2 and Na2O on the amorphous -> Crystalline phase transformation in geopolymer systems
De Silva, Premalatha and Sagoe-Crenstil, Kwesi. (2009). The role of Al2O3, SiO2 and Na2O on the amorphous -> Crystalline phase transformation in geopolymer systems. Journal of Australian Ceramic Society. 45(1), pp. 63 - 71.
The effect of ai203 and si02 on setting and hardening of na20-ai203-si02-h20 geopolymer systems
De Silva, Pre and Sagoe-Crenstil, Kwesi. (2008). The effect of ai203 and si02 on setting and hardening of na20-ai203-si02-h20 geopolymer systems. Journal of the Australian Ceramic Society. 44(1), pp. 39 - 46.
Medium phase stability of na20-ai203-si02-h20 geopolymer systems
De Silva, Pre and Sagoe-Crenstil, Kwesi. (2008). Medium phase stability of na20-ai203-si02-h20 geopolymer systems. Cement and Concrete Research. 38(6), pp. 870 - 876. https://doi.org/10.1016/j.cemconres.2007.10.003
Kinetics of geopolymerization: Role of al2o3 and sio2
De Silva, Pre, Sagoe-Crenstil, Kwesi and Sirivivatnanon, V.. (2007). Kinetics of geopolymerization: Role of al2o3 and sio2. Cement and Concrete Research. 37(4), pp. 512 - 518. https://doi.org/10.1016/j.cemconres.2007.01.003
Carbonate binders: Reaction kinetics, strength and microstructure
De Silva, Pre, Bucea, L., Moorehead, David and Sirivivatnanon, V.. (2006). Carbonate binders: Reaction kinetics, strength and microstructure. Cement and Concrete Composites. 28(7), pp. 613 - 620. https://doi.org/10.1016/j.cemconcomp.2006.03.004